An automatic fossil watch is a beautiful but also expensive timepiece. If it stops working, it can be a big disappointment.
This article is about automatic fossil watches that stopped working. And here you’ll find its causes plus solutions.
What Can Cause a Fossil Automatic Watch to Stop Working?
There are a few reasons why an automatic fossil watch might stop working.
First, the battery can run out of power. If you have a model with an automatic movement, the watch will keep running if you manually wind it every day, but if you don’t use the watch for a while, the battery may run down, and the watch will stop working.
Second, the gear train inside the watch can fail. This is more likely to happen if you heavily use your automatic fossil watch, such as running or swimming. The gears can get dirty and worn down over time, which can cause them to break.
Third, the watch band can break. If the band is made from a material that is not strong enough, it can break when you wear the watch and will no longer hold the watch together.
Fourth, the watch face can become scratched or damaged. This can happen if you drop your watch or bang it against something rugged.
Finally, some parts of the watch can become worn out and must be replaced.
How to Fix a Fossil Automatic Watch That Has Stopped Working
First, try winding the watch manually. If the watch still doesn’t work, your battery may have run down entirely, and you will need to replace it.
Second, try replacing the battery with a new one. If that doesn’t work, your gear train may have failed, and you will need to fix it.
Third, try cleaning the gears inside the watch with a dry cloth or vacuum cleaner. If that doesn’t work, your watch face may be scratched or damaged, and you will need to get it fixed or replaced.
Fourth, if none of these solutions work, the tour watch may be broken, and you will need to repair or replace it.
Fifth, If the watch is not working because of a dirty movement, try oiling it. Be sure to put a light layer of oil on the moving parts and allow them to sit for at least 30 minutes.
How to take the movement out of an automatic fossil watch.
If your fossil automatic watch needs to be repaired or replaced, you will need to take the movement out of it. This is usually done by removing the watch face and unscrewing the watch body.
How to clean the fossil automatic watch gears.
If your gear train has failed on your automatic fossil watch, you must clean the gears inside. To do this, you must remove the watch face and unscrew the watch body.
Then, you will need to use a dry cloth or vacuum cleaner to clean the gears.
How to put the movement back into an automatic fossil watch.
If your fossil automatic watch needs repair, you must put the movement back into it. To do this, you must remove the watch face and unscrew the watch body.
Then, you will need to use a screwdriver to unscrew the gears and put them back into their correct position.
An automatic fossil watch is a beautiful timepiece that can last for years if taken care of. If it stops working, don’t worry. We have instructions on how to fix it.
I hope this article satisfied you on “Fossil Automatic Watch Stopped Working“.